Custom, Affordable Video Surveillance Solutions

 

Call us Toll-Free 1-877-DEALS-79 (1-877-332-5779)

Audio / Microphones

For the higher-end ETS-brand microphones:

- If the camera is non-POE, 12v: Use ETS SM2 + SM1 series Microphones, cut off AC transformer to piggy-back power.

- If the camera is non-PoE, 24v: Use ETS SM2 + SM1 series Microphones, plug AC transformer into wall.

- If the camera is PoE: Use ETS SMEA-1 + SM1 series Microphones.

- If you are using a DVR the SM2 is placed near the DVR. You use the provided AC adapter.

If the camera is IP, the SM2 does not have to be used. 

Grid List

Set Descending Direction

1-10 of 30

Page:
  1. 1
  2. 2
  3. 3
  1. LTS 0690-HI Microphone for CCTV Audio Monitoring

    Use with any CCTV Camera by running a separate cable with 6-12v DC power and data. Can only be used with an IP camera if it has an audio input.

    Micro-chip design, small noise, high-fidelity.
    Operating-voltage: 6-12V DC.
    Frequency range: 100-5500 Hz.
    The adjustable sensitivity.
    Bug range: 30 square meters.

    Learn More
  2. Microphone for CCTV Camera: 12v DC, can piggy-back power; requires audio cable
    If you have security cameras without microphones, this is the easiest way to add audio listening capabilities. You can piggy-back the power off the camera, so no need to run an additional wire for power. You would just need to run a wire for audio. Or you can use our "AVP" Audio/Video/Power balun (sell the Related Products section on the far right) to run audio, video, and power over a single Cat5 cable. Learn More
  3. DH-PFM140

    FEATURES :

    >Omni-directional condenser microphone, high fidelity;
    >30KV Air contact ESD, built-in Lightning Protection, power supply polarity reversal protection and electrostatic protection
    >Pinhole design, hidden installation; match with cameras or storage devices which have audio function!

    Learn More
  4. ETS-SM2
    $41.30

    Made in USA

    Description

    Powers an SM1 series microphone and routes its audio output to an RCA jack (or 3.5mm) for connection to equipment with an un-balanced line level input. Ideal for DRVs, remote monitoring applications, and CCTV monitors with built in speakers.
    Learn More
  5. ETS MSP-1 Microphone Mute/Kill Switch with LED Status Indicator-MSP-1
  6. Microphone for IP Cameras with Mic Input or Terminal Block

    Note-camera must accept electret type microphone inputs (camera supplies power to CM cartridge) Omni-directional 25' pickup pattern

    • Frequency response 20-16Khz
    • microphone encapsulated in small diameter plastic housing.
    • 6' cord with 3.5mm connector.
    • Can also be used on a PC microphone input.

    Optional custom cord length up to 25'.

    Learn More
  7. PM1: Indoor Microphone: Professional, Omni-Directional, Flush Mount
    $44.30

    Features:

    The PM1 is a professional grade, flush mount, low cost, Electret, Omni-directional, transformer-less, balanced output, 12 to 48vdc phantom powered microphone for use with professional audio mixing consoles. It is the first of its kind in a series of fixed location Microphones for use in professional audio applications or for use with security system equipment capable of supporting 12 to48Vdc phantom powered, balanced output, un-pre-amplified microphones.

    The PM1- x is a high quality,

    12 to 48VDC phantom powered, balanced output, un- pre-amplified microphone for use with professional audio consoles or security equipment with compatible microphone inputs .PM1-x Microphone Placement.Locate the PM1-x Microphone near the area of interest in the room to be monitored. If the entire room is to be monitored,locate the PM1-x in the middle of the room. Do not mount the microphone near air conditioning vents, light fixtures or electrical equipment. The PM1-x should be placed at least fivefeet away from the subject(s) to be monitored. The PM1-x is still useable in the range of 15-25 feet but is dependent onthe level of background noise inthe area. Experimentation in the environment will determine what distances work best. In outdoor applications, it is best to locate the microphone where it is not directly exposed to the elements to avoid accumulation of water, snow or ice. The PM1-WPW can withstand extreme weather but the collection tube may still become blocked as a result of direct exposure to precipitation.PM1-W and PM1-WPW have removable windscreens for cleaning purposes.

    Cable Run

    Run a 22 gauge, stranded, two conductor, shielded cable between the PM-1 microphone and the monitoring device ormixing console. Keep the cable run distance under 500 feet and away from AC power sources, light fixtures and electrical equipment. Connect the PM1- to a mixing console or other equipment as shown in the diagram below.

    Caution


    It may be against the law to install this microphone kit in certain environments. It may also be against the law to record conversations of the person(s) being monitored without their knowledge. It is the responsibility of the installation company and end-user to determine if the application of this product is legal. These laws vary from state to state. If you are not informed on these matters, consult a qualifiedattorney or contact the appropriate state agency. A sticker is provided with this kit for the applications where notification must beposted.

    Warranty


    All ETS products carry a one year parts and labor warranty. Thiswarranty does not cover damages as a result of misuse, improper handling of the unit or exposure to extreme temperatures or moisture. At its discretion, ETS reserves the right to repair or replace thisunit under the conditions of the warranty. If you experience prob
    lems with your equipment call ETS at: 505-888-3923 to obtain areturnauthorization number. Equipment requiring repair beyond the warra
    nty period or units that have been damaged or are not covered under the warranty can be repaired by ETS for a minimal cost under most conditions.
    Learn More
  8. ETS-SM1
    $45.61

    Made in USA

    Description

    High performance, Omni-directional,
    pre-amplified microphone for fixed
    location security applications. 25’ pickup
    pattern in all directions. Built in limiter
    circuit automatically lowers the output
    level during loud sound intervals.
    Selectable Hi cut and low cut filters
    significantly reduce background noise.
    Flexible plastic plate mounts flush or on
    a single gang electrical box.
    Connects directly to our switcher / mixer /
    amplifiers or use one of our many
    interface products to make fast and clean
    connections to DVRs or remote
    monitoring equipment.
    Learn More
  9. IP Camera Microphone with Surface Mount

    Note-camera must accept electret type microphone inputs (camera supplies power to ECM cartridge)

    • Omni-directional 25' pickup pattern
    • Frequency response 20-16Khz
    • Standard electrical "single gang" cover plate.
    • 6' cord with 3.5mm connector.
    • Can also be used on a PC's microphone input.

    Optional custom cord length up to 25'.

    Learn More
  10. SM1-CF: Remote Element Covert Microphone
    $55.17

    Description

    High performance, omni-directional
    pre-amplified microphone for use in
    covert applications. Small form factor
    microphone and pre-amplifier circuit
    board. Heat shrink protected,
    pre-amplifier board can be mounted
    with the affixed foam backed tape or
    left floating inside a wall or hidden in
    a ceiling.
    Connects directly to our switcher /
    mixer / amplifiers or use one of our
    many interface products to make
    fast and clean connections to DVRs
    or remote monitoring equipment.

    Includes:
    • ML1-C microphone
    • SM1-N pre-amplifier
    • Warning label.

    Installation instructions.

    Wiring requirements:
    2 conductor shielded (with drain wire) 22
    gauge stranded. Max cable length 1500’.

    Caution

    It is the responsibility of the installation
    company and end user to install this audio
    surveillance equipment in compliance with
    state and federal privacy laws. If you are
    unfamiliar with these laws, consult a qualified
    attorney.
    Warranty
    1 year parts and labor. Made in USA
    Learn More

Grid List

Set Descending Direction

1-10 of 30

Page:
  1. 1
  2. 2
  3. 3