Custom, Affordable Video Surveillance Solutions

 

Call us Toll-Free 1-877-DEALS-79 (1-877-332-5779)

PoE Switches | Injectors

Use a PoE (Power over Ethernet) Switch to send power and to send/receive network data to any network-enabled device such as an IP (network) camera, IP Phone, etc.

Grid List

Set Descending Direction

1-10 of 40

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Gigabit Power Over Ethernet PoE Injector-TL-POE150S

    Features:

    • IEEE 802.3af compliant
    • Deliver power up to about 328.1 feet(100 meters)
    • Gigabit Ethernet ports
    • Auto-detect the required power supply
    • Plug-and-Play - Require no configuration
    Learn More
  2. PD-AS-701/18
    $69.00

    Out of stock

    Features:

    PowerDsine’s PD-AS-701 High-Power active splitters enable data terminals that were not originally designed to accept power from the Ethernet, to be powered by HiPoE (High Power over Ethernet) switches and midspans. The PD-AS-701 High Power series (12v, 18v and 24v) can power devices such as WiMAX CPEs, small WiMAX base-stations, 802.11n Access-Points, Thin-Clients, Video-Phones, PTZ (Pan/Tilt/Zoom) IP Cameras and more.

    Learn More
  3. Planet POE-E101 802.3af Power over Ethernet Extender

    PLANET POE-E101 is a newly designed and simple device which extends both the reach of Ethernet Data and IEEE 802.3af Power over Ethernet over the standard 100m (328 ft.) CAT5e/6 UTP cable to 200m, 300m or longer distance. Currently, PoE supported networking devices such as PoE IP Cameras, PoE Wireless Access Points and PoE IP Phones have become the mainstream of network deployment because of the convenience of easy installation regardless of additional power supply. However, limited by the UTP cable specifications, only up to 100 meters (328 ft.) cable could be applied for IP-based and PoE powered devices (PD) installation. Therefore, the POE-E101 is designed as the repeater to forward both Ethernet data and PoE power and thus range the PoE powered device installation. By just plug and play but no additional power supply or set up required, one single POE-E101 can increase the PoE range to 200m. By daisy-chaining multiple PoE-E101s, it offers you great flexibility to extend the distance of PoE network to triple, quadruple further in length or more.

    Providing PoE and Ethernet data extension ability, the POE-E101 is an ideal solution for service providers, campuses and public areas networking application which requires PoE deployment of wireless access points, IP-based surveillance cameras or IP phones in any places. It enables you to centrally manage the power from one location easily, efficiently and cost effectively.

    The POE-E101 PoE Extender is quite easy to be installed by simple plug and play. It is used between a Power Source Equipment (PSE) and the Powered Device (PD); it injects power to the PD without affecting the data transmission performance. The POE-E101 offers a cost effective and quick solution to doubles the standard range of PoE from 100 to 200 meters. There are 2 RJ-45 ports in a compact mini box of PoE Extender, of which the IN port functions as "PoE (Data and Power) input" and the other port on the other side functions as "PoE (Data and Power) output". The "PoE OUT" port is also the power injectors which transmit DC Voltage to the Cat5e/6 cable and transfer data and power simultaneously between the PSE and PD.

    Features:

    • Complies with IEEE 802.3af Power over Ethernet
    • Extends the range of PoE an additional 100 meters (328ft.)
    • Forwards both Ethernet data and PoE power to remote devices
    • Automatically detects and protects PoE equipments from being damaged by incorrect installation
    • Multiple units, daisy-chain installation support
    • No external power cable required for installation
    • Compact size, Wall-Mountable design
    Plug-and-Play

    Learn More
  4. PLANET 4-Port PoE 802.3af Power Over Ethernet Injector Hub, 3yr

    We usually stock at least a couple units. Larger orders can take 10-14 days to ship. Stock changes daily.

    Data Sheet

    Instruction

    The PLANET POE-400 is a 4-Port IEEE 802.3af Power over Ethernet injector hub complied with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. Equipped with 4 10/100Base-TX Fast Ethernet ports, the POE-400 supports full 48VDC power for any remote IEEE 802.3af powered device (PD) like Wireless LAN Access Point, IP phone, and LAN Camera. Supporting power supply of 70 watts, the POE-400 provides sufficient power to the 4 remote devices.

    There are 8 RJ-45 STP ports on POE-400. Half of the ports on right panel function as "Data" and the other half on left panel function as "Data and Power". Each of the "Data and Power" port is an injector which inserts DC Voltage into the CAT 5 cable for allowing having the cable between the Injector and Splitter to transfer data and power simultaneously.

    Ordering Information
    POE-4004-Port IEEE 802.3af Power Over Ethernet Injector Hub

    The IEEE 802.3af Injector Hub and equipment installation:
    For the places hard to find the power inlet, the POE-400 provides the easiest way to power your Ethernet devices, such as PLANET IEEE 802.3af Power over Ethernet Splitter (POE-152S) with Internet Camera (ICA-210) or Wireless Access Point (WAP-4060PE) installed in the small office. To control the power system of your networking devices, the POE-400 can directly co-work with PLANET ICA-100PE and POE IP Phone VIP-153PT to build VoIP telephony network in the office. Besides, the POE-400 can be directly deployed to connect the third party IEEE 802.3af devices like Cisco AP and POE switches installed 100 meters away.

    Ordering Information
    POE-4004-Port IEEE 802.3af Power Over Ethernet Injector Hub

     

    Learn More
  5. SecuNext SPD-POE

    If lightning were to hit a camera, it would blow that camera, and it could easily blow several other cameras and network devices that are connected by wired Ethernet cable. This unit will prevent further damage to other devices, and is recommended for installations where power surges or lightning storms are common. This device is PoE, so it will transmit power and data to the device, as well as provide power and Ethernet surge protection.

    Features:

    • Protects equipment from high voltage surges from nearby lightning strikes
    • RJ45 Jack to RJ45 Jack
    • Power and signal line protection
    • 10/100 Base-T CAT5/CAT5e compatible
    • 802.3af POE (Power over Ethernet) compatible
    • Application for POE (Power over Ethernet) protection
    • Designed to work with POE Network (IP) Cameras
    Learn More
  6. PD-9001GR
    $79.00

    Features:

    • IEEE 802.3at compliant with 2-event classification
    • IEEE 802.3af backward compatible
    • Output power of 30W is guaranteed
    • Supports 10/100/1000Base-T applications
    • Compatible with IEEE 802.3af devices and pre standard devices
    • Safe: low power devices receive only the power they need
    • Automatic Detection and Protection of non–standard Ethernet terminals
    • Compact design fits easily in WLAN Access Point and IP Cameras installations
    Learn More
  7. TP-Link 8-Port 10/100Mbps Desktop Switch-TL-SF1008P
    $79.95

    Features:

    Supports PoE power up to 15.4W for each PoE port
    Supports PoE power up to 57W for all PoE ports
    Supports PoE IEEE 802.3af compliant PDs
    Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
    2K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging
    LED indicators for monitoring power, link, activity
    External power adapter supply

    Learn More
  8. Unmanaged 8-Port 10/100Mbps 4-Port PoE Switch
    $79.95
    • Reduces equipment cost by delivering data and power over existing network cables
    • 4 PoE and 4 standard 10/100Mbps ports
    • Flow Control for Full-Duplex mode
    • TPE-S44 8-Port Smart Switch integrates Power over Ethernet (PoE) and network management features into a cost effective and scalable solution. The TPE-S44 reduces equipment cost by delivering data and power over existing network cable infrastructure.
    • IEEE 802.3af Power over Ethernet (PoE) Standard Compliant
    • 8 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports
    • Built-in 4 PoE Ports (Port 1 ~ Port 4)
    • Supports PoE Power Maximum 15.4 watts for each POE port
    • Supports PoE Powered Device (PD) classification identify
    • Full Wire-Speed Non-Blocking Reception and Transmission
    • Store and Forward Switching Method
    • 96Kbytes RAM Data Buffer and 1K entries MAC Address Table
    • Extensive Diagnostic LED's on the Front Panel
    • IEEE 802.3x Flow Control for Full-Duplex Mode; Back Pressure Flow Control for Half-Duplex Mode
    • 3-year limited warranty
    Learn More
  9. VTNS1060A-OEM
    $80.00

    FEATURES :

    > Decent appearance.
    > Dahua protocol POE switch
    > Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together

    Learn More
  10. DH-PFS3106-4P-60
    $90.00

    FEATURES :

    >Two-layer industrial POE switch
    >MAC auto study and aging, MAC address list capacity is 8K
    >Support IEEE802.3af, IEEE802.3at standard 
    >Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards
    >Industrial wide temperature design

    Learn More

Grid List

Set Descending Direction

1-10 of 40

Page:
  1. 1
  2. 2
  3. 3
  4. 4