Custom, Affordable Video Surveillance Solutions

 

Call us Toll-Free 1-877-DEALS-79 (1-877-332-5779)

KT&C 8 Channel Tribrid DVR, HD-TVI/Analog 960H 30fps/1080p + 2ch IP, VGA/HDMI/CVBS, Spot-Output, eSATA, 1.5U, 5x Audio, Alarm, 4x SATA, 5yr

EZHD-TRF8

More Views

KT&C 8 Channel Tribrid DVR, HD-TVI/Analog 960H 30fps/1080p + 2ch IP, VGA/HDMI/CVBS, Spot-Output, eSATA, 1.5U, 5x Audio, Alarm, 4x SATA, 5yr SKU: EZHD-TRF8
$539.95

In stock

Availability: Ships within 1 business day.

4x Buyer Protection

FEATURES :

  • Intelligent Video Inputs: connect 1080p/720p EZHD HD-TVI or 960H/SD analog to ANY input at any time
    - Reuse existing analog cameras or choose any mix of HD/SD on new systems
    - Upgrade any analog camera to megapixel at any time
    - Superlative HD resolution of 1080p Full HD or 720p HD for amazing image quality
    - Useful digital zoom on live view and playback 
    - Field select 1080p or 720p, 30/25 Hz or 60/50 Hz
  • Operation over ‘almost any’ wire
    - More than 1000 feet on standard RG59 coax
    - More than 1500 feet on RG6
    - More than 500 feet on UTP (one pair from a Cat5e cable, using optional KA-HDBAL1 balun pair).
  • Display Live/Record 2.1 Megapixel 1920x1080 (1080p), 1 Megapixel 1280x960 (720p), 960x480 (WD1/960H), 704x480 (SD)
    - Real time recording on any/all channels at 1080p, 720p, WD1 or SD resolution
    - Playback any/all cameras at up to real time record rate
    - Independent configuration for each channel: resolution main/sub-stream, FPS, bit rate, image quality, etc.
  • Up-the-cable control [UTC] to access compatible camera OSD menus from the DVR PTZ controls (local or remotely)
  • Triple Technology Recording: Connect 2 additionalOMNI-IP Plug-and-Play IP cameras (4+2, 8+2, 16+2) up to 1080p resolution without sacrificing BNC inputs
  • H.264 Compression for efficient HDD utilization
    - Four internal hard drives for up to 24Tb of internal storage, plus eSATA port; (up to 8)
    - Up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
    - Simultaneous high bandwidth recording plus sub-stream recording for reduced bandwidth remote viewing 
    - Watermarking for validation of recorded video
    - Record scheduling per-camera, with HDD quotas, holidays, parameter change on alarm/event
  • Unique Channel 0 remote stream displays user defined multi-view in the bandwidth of a single channel
  • Pentaplex Operation (Simultaneous live, recording, playback, archiving and remote viewing)
  • Easy router setup for remote access: uPnP/NAT automatically sets up port forwarding (router must support/allow uPnP)
  • HDMI/VGA and CVBS monitor outputs for up to 1080p HD display detail; use either for main or spot/call functions
  • User friendly GUI with graphical icons, visual indicators and multiple language support
    - Easy to use on-screen menus include digital zoom and instant playback of recent video
    - Operate using front panel controls, wheel mouse or optional IR remote
  • Quickly locate and review event video
    - Search by date/time, or preview images by pointing along a color coded timeline of record type
    - Tag video of interest for easy retrieval or export
    - Play based on results of extensive event/alarm log search
    - Use “Smart Search” to define an area of interest; the DVR quickly reviews recorded video to list instances of motion in that area for review by the operator

    - Use Video Content Analysis event detection on two BNC channel
         - Line crossing (with direction) up to four lines
         - Area intrusion (with loitering time) up to four areas
         - Rapid fast forward can scan quickly between VCA events, yet plays events at normal speed

  • Digital Zoom with Virtual PTZ in Live & Playback
  • Privacy masking (4 zones) to block observation of specific areas within the field of view
  • Audio Inputs (5) and Outputs (2) for recording and/or two way audio
  • Alarm inputs (16) and outputs (4) to interface with local hardware
  • Ethernet interface for remote network viewing and control, and to connect IP cameras
  • Multiple Control Inputs: local mouse/hand held IR remote controller (mouse included); web browser and CMS controls
  • On-screen PTZ control via mouse or IR remote
  • USB 2.0 ports on front and one on rear panel for video archive and mouse usage
  • Free DDNS Service – static IP address is not required for reliable remote access
  • IE, Chrome, Firefox and Safari browser Web clients
  • Free Multi-Site Windows and MAC OMNI CMS can display up to 64 live/4 playback views
  • Remote configuration support from built-in web interface and/or free OMNI CMS program
  • Free iOS and Android apps:
    - Scroll though 16 display live views 
    - Playback specific cameras by date/time plus easy slider control
    - Audio monitoring support 
    - PTZ and relay control 
    - Up to 16 camera views from HD tablets (HD app)
OR
Description

Details

SPECIFICATIONS :

Model EZHD-TRF8
Intelligent Video Inputs Analog EZHD/SD Inputs 8
HD Video Resolutions EZHD / HD-TVI 720p30(25), 720p60(50), 1080p30(25)
Analog CVBS Video Input Up to 960x480,720x480(NTSC); 960x576,720x576(PAL)
Adaptive Ports Input Format Auto Detection, EZHD/SD can be mixed in any combination, at any time
Interface BNC Connector; 1V p-p, 75Ω
Privacy masking 4 areas programmable in OSD menu
Additional OMNI-IP PNP Channels (up to 2 MP) 2
Total Cameras Supported 10
Video Output Main HDMI & VGA Full HD 1920×1080/60Hz; SXGA: 1280×1024/60Hz; 720P: 1280×720/60Hz; XGA: 1024×768/60Hz
CVBS Analog BNC NTSC 704x480 / PAL 704x576; 1V p-p, 75Ω
Display Modes 1, 2x2, 1+5, 1+7, 3x3, 4x4 split; User Defined Sequence / Alarm Pop-up HDMI/VGA and/or CVBS may be configured as main or call/event monitor
Recording Video Compression Dual Stream: H.264 for Main Stream and Sub-stream
Video Bitrate 32Kb/s~10Mb/s each channel
Encoding Main Stream 1080p; 720p; WD1; 4CIF; VGA; CIF
Sub Stream WD1, 4CIF; CIF; QVGA; QCIF
Frame Rate Main Stream 1/16 fps ~ Real time frame rate
Sub Stream 1/16 fps ~ Real time frame rate
Quality 6 levels: Lowest/Lower/Low/Medium/Higher/Highest
Mode Continuous; Motion; Alarm; Motion or alarm, Motion + Alarm, VCA, None
Motion Detection & VCA
Configurable per camera for area(s), sensitivity and arming schedule programmable by day of week and hour of day
Schedule Period Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
Pre- and Post- Event Recording Pre-record 0~30 seconds; post record 5s~10 minutes
Playback Synchronous Playback 8 channels
Playback Resolution 1080p, 720p, WD1, 4CIF, VGA, CIF, QVGA, QCIF
Search Type Time/Date; Event (Alarm, Motion, VCA); Manual Tags; Smart Search for motion events from recorded video
Capacity Up to record rate
Playback Controls Play; Pause; Forward/Reverse; speed control for single~1.8~Vmax (256x); jog/shuttle Slide bar with overview of record type and snapshot display from slider position, VCA based accelerated playback between normal play of VCA events
Digital Zoom During Playback Supported on Local Displays and CMS
Event & Alarm Event Source MD (Motion Detection), Video Loss, Video Tampering/Exceptions, Video Content Analysis: Line Crossing with Direction (4-Lines); Area Intrusion (4 areas) for one BNC channel 
Event Action Schedule Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
Event Action Buzzer, E-mail, Alarm Full Screen Pop-up, Notify CMS Client, trigger alarm output
MD Area User selectable grid pattern 22x15 areas with adjustable per camera sensitivity
 
System Alarm Alarm Source HDD Error, HDD Full, LAN Fail/Address Conflict, Illegal login, Video Signal Exception/, Record/Capture exception
Alarm Action Buzzer, E-mail, Notify CMS Client (network permitting), trigger alarm output
  Two-way audio Audio input pass through to remote web or CMS client; remote audio from web or CMS client pass through to audio output
Audio Input 4 Inputs for record, 1 input for two way audio; RCA, 2V p-p, 1KΩ
Output 2 Outputs; RCA, 2V p-p, 1KΩ
Compression Up to 64Kbps, G.711u
Network Interface 1Gb/s 1000 Base-T Ethernet RJ-45
Addressing Static IP, DHCP, xDSL support
NTP/DST Supported; choice of time zone, NTP server, DST start/end/offset
Protocols Supported TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTPS, KT&C Plug-and-Play (for connected IP Cameras), OMNI Utility Device Discovery
NAT uPnP router NAT/port mapping forwards ports automatically (*Router must support/permit uPnP function)
Users Up to 128 simultaneous connected users
DDNS Simple DDNS free service tracks WAN IP address and HTTP port
Security User IDs “Admin”, plus multiple configurable login IDs
User Levels All rights for “admin”; Per camera per user rights assignment for Operator and User levels
User Privilege Control Local and remote access to Live views, audio, recording, playback, menus, PTZ, alarms, copy, logs, upgrade, reboot
Storage & Clip copy HDD Storage 4 SATA HDD up to 6Tb each
eSATA One, on rear panel (up to 8)
NAS/SAN up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
Copy Type Multi-Channel or Single Channel File
Copy Device USB 2.0 Drive (2 ports)
S.M.A.R.T. Temperature, duration, error rates, bad sector detection, and more
  USB 2.0 Ports Two front, one rear for mouse and data I/O
Serial & I/O Serial Port 1 RS-232C (future use)
RS-485 One; selectable speed and bit pattern; multiple protocols (Pelco P, Pelco D, others)
Inputs 16 alarm inputs
Outputs 4 alarm outputs
Keyboard Input for external control keyboard
Up the Cable Control Multiple protocols, can be sent out of any BNC port to compatible cameras
User Controls Local Controls Front Panel camera, function and navigation buttons; IR Remote; Mouse
Software Web Viewer Live view, playback and configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension installed)
User Rights Control Per user-per camera for multiple functions
Mobile Viewer iOS and Android supported ; live 16 camera views; 4 camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, displays up to 16 live view cameras
CMS Free PC and MAC Clients support multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
Event Logging Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
Firmware Upgrade From USB or remotely
Backup/Restore Configuration From USB or remotely
  Dimension (W x H x D) 17.5” x 15.3” x 2.7” | 445 × 390 × 70mm
General Chassis Type 19” rack-mountable 1.5U chassis
Weight without HDDs 11 lb. / 5Kg
Operating Temp 14°F~131°F (-10°C~55°C)
Operating Humidity 10% ~ 90%
Voltage 100~240 VAC 47~63Hz
Power Up to 30W
Certifications FCC, CE, RoHS

Downloads:

Datasheet

User Manual

Additional Information

Additional Information

SKU EZHD-TRF8
Model EZHD-TRF8
DVR Type Standalone
DVR Function Tribrid: HD-TVI, Analog CVBS, IP
Number of Audio Channels 5
Live View Resolution Up to 1080p (1920x1080)
Recording Resolution Up to 1080p (1920x1080)
Hard Drive No
Optical Drive None
Mobile Compatibility iPhone/iPad, BlackBerry, Android, Windows Mobile, Symbian
Remote OS/Browser IE, Windows, Safari, Mac OS 10.7+, Google Chrome
IP Camera Support Yes (requires compatible cameras)
Case 1.5U Rack Mount
Brand KT&C
Shipment Ships within 1 business day.
Manufacturer's Suggested Retail Price $806.00
Reviews